Technology1 min read

Launch HN: Axonnic (YC F26) – Sleeves that track fingers and estimate force

By · Published by Everything Blog

In short

The Y Combinator startup measures motion and fingertip force in real time, delivering 50 predictions each second. Its tracking model maintains an average joint-angle error of 4.58 degrees, verified on held-out recordings alongside Apple Vision Pro data. When putting the wearable back on, a user must provide two minutes of motion data so the system can finish recalibrating in under 60 seconds.

Key points

  • Performance results were validated using held-out comparison recordings captured on the A…: Performance results were validated using held-out comparison recordings captured on the Apple Vision Pro.
  • Re-donning the wearable requires two minutes of active user movement to prepare for calib…: Re-donning the wearable requires two minutes of active user movement to prepare for calibration.
  • The automated system completes its full re-calibration sequence in less than one minute.: The automated system completes its full re-calibration sequence in less than one minute.

Sources checked by our analysis pipeline: 1

The hand disappears.The sleeve still knows.

Individual finger movements and fingertip pressure, tracked in real time from electrical signals in the forearm. No cameras, no gloves, just a sleeve.

Watch on LinkedIn- average joint-angle error

- 4.58°

- predictions per second

- 50

- of training data

- Only 78 min

Validated against Apple Vision Pro hand tracking on held-out recordings. After re-donning the sleeve, two minutes of movement re-calibrate the model in under a minute.

See the benchmarks

Technology